Tectron Anode Cell End User Benefits

Contents[Show]

Product Support and Customer Service

For Further support visit our Contact Page

LOW ELECTRICAL RESISTANCE

  • TECTRON Cells have 35% more membrane area than electrode area, resulting in less electrical resistance.
  • TECTRON Cells require less voltage to operate and lower the paint bath cooling load.

NO “DIRT” FORMATION

  • The TECTRON Cell’s slender, circular profile promotes excellent paint flow completely around the cell.
  • TECTRON Cells, with appropriate membranes, can be used in place of bare electrodes (which are a major source of sludge that can create paint film defects).

ED FILM-BUILD CONTROL

  • Desired film build can be achieved through proper selection of Cell materials and design, and electrical system integration.
  • Uniform film build distribution can lower production costs.

LIGHTWEIGHT, TWO-PART DESIGN

  • One person can safely remove the Electrode for routine inspections because it does not weigh much.
  • The Membrane Shell has a three-inch diameter and weighs even less. Its unitary construction has no bolts or joints, which are prone to leaks.

MONITORING SYSTEMS

  • Sensors and other specialized tools can collect accurate data. This enables system operators to use SPC to forecast system maintenance and repair.

FAULT TOLERANT

  • The TECTRON Cell is fault tolerant. If a Cell is shut down, there is only minimal loss of anode area and minimal stress on the surrounding Cells.

ACID BALANCE

  • Reduced acid removal rates can be achieved by appropriate choice of membrane.
  • Acid balance yields less anolyte waste stream and less direct acid addition costs.

ADAPTABLE PLACEMENT

  • Cells can be positioned easily in the ED tank to avoid conflict with eductor piping.
  • Fully submergible Cells can be placed under or over the automotive body.

BULLETIN 991101

 

 

 

 

Related Items